Flag Care & Tips

The flags we produce are of the highest standard but are not invincible so please take care of them, hopefully the tips below will help you take care of your flag. If you have any other questions that arent covered below please don’t hesitate to drop us an email or give us a ring on the contact details at the top of the page.

If you have already purchased a flag from us, and can no longer find your flag care leaflet, one can be downloaded here.

Before First Use

Handwash, Cold

When you receive your flag, to remove any excess ink or fabric coating from the printing process werecommend hand rinsing your flags with cold water until the water runs clear.

Allow it to dry on the pole.

Assembling Sail Flags

Sail flag Assembly Stage 1

1. Feed the shorter thin pole through the top sleeve.

Sail flag Assembly Stage 2

2. Feed the main pole through most of the sleeve.

Sail flag Assembly Stage 3

3. Connect the two together then finish feeding the sleeve through the main pole.

Sail flag Assembly Stage 4

4. Place the loop around the hook at the base of the pole.

Sail flag Assembly Stage 5

5. You can tighten or loosen the cord if necessary.

To Prolong the Life of Your Flag...

Tip 1

Do not use in extreme weather conditions. That flag can be used in wind speeds up to 18mph. If you use the flag in speeds above 18mph you will limit the life span of your flag

Tip 2

Allow your flag to fly in an open area. Rubbing against a wall for example will cause unnecessary wear on the flag material.

Tip 3

Avoid using the carry case for larger bases. It is designed with the poles and flag weight in mind.

Tip 4

Always wash your flag at 30º with a mild detergent should it become dirty and remember to dry it fully before packing it away.

Order Now

Need assistance
or ready to order?

email
chris@approved.co.uk

Call Us

01202 769077



Approved Flags, Unit 2, 20 Wharfdale Service Road, Bournemouth, Dorset, BH4 9BT
©2021 Approved Flags